Farm & Field Fence Installation in Bloomington, IL
Installed by a local McLean County crew. Typically $6–$18 per linear foot in Bloomington, with a flat per-foot price after an on-site measure.
Farm & Field Fence that suits Bloomington properties.
Around Bloomington, farm and field fence has to do a job: hold livestock, mark a line, and survive equipment traffic without constant repair. Families fencing for kids and dogs, plus a steady stream of vinyl and aluminum upgrades. Flat to gently graded lots with generous rear yards in the newer east-side subdivisions. We build woven wire, high-tensile, barbed, and split-rail systems sized to the animal and the acreage rather than to a catalog.
How we build it here
We drive posts rather than augering wherever the ground allows — driven posts hold better in McLean County soil and go in far faster on long runs. Deep, dark McLean County prairie soil — some of the best digging in the state. Corners and ends get H-braces or double-H braces sized to the pull, wire is stretched with a proper strainer, and gates are framed for the width of the equipment that actually uses them.
Rate depends on the run — clean, open ground moves several hundred feet a day per crew.
What farm & field fence costs in Bloomington, IL.
Installed, materials and labor.
Before tear-out, gates, and slope work.
- Wire type (woven, barbed, high-tensile)
- Post spacing and post material
- Bracing at corners and ends
- Terrain, brush clearing, and access
How a Bloomington farm & field fence install runs.
- Step 1
Walk the fence line and map runs, corners, and gate openings
- Step 2
Clear brush and old wire where needed
- Step 3
Drive line posts and build braced corner and end assemblies
- Step 4
Stretch woven, high-tensile, or barbed wire to tension
- Step 5
Hang gates sized to your equipment
- Step 6
Final tension check and cleanup
Farm & Field Fence lines available in Bloomington.
What Bloomington customers say.
“Tazewell County Fence Co. installed woven wire fencing around part of our property, along with a large equipment gate. They explained the different post options, gave us a clear estimate, and helped us choose something that fit our budget. The fence looks strong and everything was completed professionally.”
“We needed a long stretch of affordable fencing for our pasture. They helped us compare T-posts, wood posts, and different wire options before we made a decision. We appreciated that they focused on durability without pushing us toward the most expensive option.”
“Our project involved several fence runs, uneven ground, and multiple gates. They took the time to understand how we use the property and recommended a practical layout. The finished fence works well for our land and stayed within the budget we discussed.”
Farm & Field Fence questions from Bloomington homeowners.
- How much does farm fence cost per foot near Bloomington, IL?
- Agricultural fence around Bloomington typically runs $6–$18 per linear foot installed, depending on the system. Barbed and high-tensile sit at the low end; woven wire with wood posts and split rail sit at the high end. Brush clearing, creek crossings, and brace count move the price.
- What fence is best for horses versus cattle?
- Horses do best behind woven wire with a top rail, no-climb mesh, or coated high-tensile — anything that won't cut if an animal leans or panics. Cattle are usually fine with barbed or high-tensile at the right height and spacing. Tell us the animals and we'll spec the system.
- Do you clear the fence line first?
- Yes. Around Bloomington most replacement runs need old wire pulled, brush cut, and volunteer trees removed before we can set a straight line. We quote clearing as its own line item so you can see exactly what it costs.
- Do I need a permit for agricultural fence?
- Bloomington requires a fence permit and enforces corner-visibility and rear-yard setback rules closely.
Get a farm & field fence quote for your Bloomington property.
On-site measurement, flat per-foot pricing, no high-pressure pitch. Roughly 45 minutes east of Morton.