Gate Installation Installation in Peoria, IL
Installed by a local Peoria County crew. Free on-site measure, honest pricing, and hardware sized to the opening.
Gate Installation that suits Peoria properties.
The gate is the part of the fence that moves, so it's the part that fails. Most of the Peoria gate calls we take are on fences somebody else built — sagging walk gates, driveway gates dragging on the concrete, latches that never lined up. City homeowners replacing aging fence, rental owners needing durable enclosures, and small commercial sites.
How we build it here
We build and rehang gates in Peoria on oversized posts — 6x6 wood or schedule-40 steel — set deeper than the line posts and concreted with a wider footing. Loess over clay; older neighborhoods hide a lot of buried slab, brick, and old post footings. Wood gates get a steel frame or a proper diagonal brace, hinges are sized to the leaf weight, and driveway gates get a drop rod or cane bolt so the latch isn't carrying the load.
Most single-gate jobs are a half-day; driveway and equipment gates typically take a full day.
What gate installation costs in Peoria, IL.
Before tear-out, gates, and slope work.
- Walk gate vs. double drive gate
- Material (wood, vinyl, chain-link, aluminum)
- Hardware grade and self-closing hinges
- Repair vs. full replacement
How a Peoria gate installation install runs.
- Step 1
Measure the opening and check post plumb and footing depth
- Step 2
Replace or re-set undersized gate posts if needed
- Step 3
Build or order the leaf, framed and braced for the span
- Step 4
Hang on properly sized hinges with a level swing
- Step 5
Install latch, drop rod, and any self-closing hardware
- Step 6
Adjust the swing and walk it with you
Gate Installation lines available in Peoria.
What Peoria customers say.
“They removed our old wood fence, cleaned up the debris, and installed the new fence without leaving a mess behind. The whole process was straightforward, and we always knew what the next step would be. I would definitely recommend them.”
“Tazewell County Fence Co. installed woven wire fencing around part of our property, along with a large equipment gate. They explained the different post options, gave us a clear estimate, and helped us choose something that fit our budget. The fence looks strong and everything was completed professionally.”
“We had a chain-link fence installed for our backyard and dogs. Communication was easy, the pricing was reasonable, and the finished fence looks great. They also made sure the gates opened smoothly and were placed exactly where we needed them.”
Gate Installation questions from Peoria homeowners.
- How much does a gate cost in Peoria, IL?
- Gate work in Peoria generally runs $350–$2,500 depending on scope. A standard walk gate sits at the low end; a wide double driveway or equipment gate with new posts and heavy hardware sits at the high end.
- Why does my gate sag?
- Almost always one of three things: the gate post is too small or set too shallow, the leaf has no diagonal brace, or the hinges are undersized for the weight. Fixing the symptom by shimming the hinge never lasts — we fix the post and the frame.
- Can you add a gate to an existing fence?
- Yes, that's a common Peoria job. We cut in the opening, set a proper gate post on each side, and match the new leaf to the existing style so it doesn't read as an add-on.
- Do you install self-closing pool gates?
- Yes. Pool gates need self-closing hinges, a self-latching mechanism with the release mounted high on the inside, and an outward swing. We build to that spec on every pool enclosure in Peoria County.
Get a gate installation quote for your Peoria property.
On-site measurement, flat per-foot pricing, no high-pressure pitch. About 20 minutes from Morton.