Deck Lighting Installation in Morton, IL
Half the year in Morton it's dark before dinner. Lighting is the difference between a deck that shuts down in October and one that gets used through the fall. It's also a safety item — unlit stair treads are how people get hurt on their own deck.
How we build it in Morton
We run low-voltage 12V systems on a transformer with a photocell and timer, wiring pulled inside the framing before decking goes down whenever we're building new. Riser lights go in the stair risers, cap lights on the rail posts, and a warm strip under the rail to wash the deck surface. Retrofits on existing Morton decks route the wire through fascia and rail channels so nothing is visible from a chair.
- Plan fixture locations against how the deck actually gets used
- Transformer location and circuit confirmed with your electrician if needed
- Low-voltage runs pulled through framing and rail
- Riser, post-cap, and under-rail fixtures set
- Timer/photocell programmed and zones balanced
- Night walkthrough so you can see it before we call it done
One day for most packages; same-visit when we're already building the deck.
What Morton neighbors say.
These are verified customer reviews of Tazewell County Fence Co. — the same owners, crew and phone line behind Grizzly Deck & Rail.
“Tazewell County Fence Co. installed woven wire fencing around part of our property, along with a large equipment gate. They explained the different post options, gave us a clear estimate, and helped us choose something that fit our budget. The fence looks strong and everything was completed professionally.”
“We had a chain-link fence installed for our backyard and dogs. Communication was easy, the pricing was reasonable, and the finished fence looks great. They also made sure the gates opened smoothly and were placed exactly where we needed them.”
“A section of our fence was damaged during these storms, and Tazewell County Fence Co. was able to repair it without trying to sell us an entirely new fence. The repaired section blends in well with the rest of the fence, and the price was fair.”
Deck Lighting in Morton — questions we get
- How much does deck lighting cost in Morton, IL?
- Most Morton lighting packages run $850 to $4,200 installed depending on fixture count and whether it's new construction or a retrofit. Stair risers plus post caps on a typical deck usually lands $1,400–$2,800.
- Can lighting be added to an existing deck?
- Yes. Retrofits are most of what we do. Riser lights and rail lighting are straightforward; under-board lighting sometimes means pulling a few boards, which we'll tell you before we quote it.
- Is it low voltage or line voltage?
- Low voltage, 12V, off a transformer. It's safer around a wet deck surface, doesn't require conduit through the framing, and lets us add fixtures later without re-wiring.
- Does lighting need a permit?
- Low-voltage deck lighting generally doesn't, though the receptacle feeding the transformer may. Morton requires a village building permit for any deck attached to the house or more than 30 inches off grade, plus a plat of survey showing setbacks. We pull it and meet the inspector.