Wood Deck Building in Washington, IL
Wood is still the fastest way to get real usable square footage behind a Washington house. Newer construction from the rebuild years alongside established homes, most with generous back yards and mature trees. Pressure-treated pine is the budget-friendly option and takes stain well; western red cedar costs more, sits lighter underfoot, and can be left to silver out. Both are the right call when the goal is a big deck on a real budget.
How we build it in Washington
We build Washington wood decks with kiln-dried-after-treatment lumber where we can get it, boards crowned up, and stainless or coated structural screws instead of nails that back out in year three. Rolling ground east of the square with a lot of walkouts, so multi-level decks with a stair run to grade are the norm rather than the exception. Framing is doubled under the rail posts, joist tops are taped so water doesn't sit on end grain, and the whole surface is dead-level to the eye with consistent gaps.
- Measure, stake the footprint, and confirm setbacks
- JULIE locate
- Footings below frost, posts set plumb and braced
- Ledger flashed, beams set, joists hung and crowned
- Decking screwed down with consistent spacing and clean butt joints
- Rail, stairs, optional stain, cleanup
Two to five working days for most residential wood decks.
What Washington neighbors say.
These are verified customer reviews of Tazewell County Fence Co. — the same owners, crew and phone line behind Grizzly Deck & Rail.
“A section of our fence was damaged during these storms, and Tazewell County Fence Co. was able to repair it without trying to sell us an entirely new fence. The repaired section blends in well with the rest of the fence, and the price was fair.”
“Tazewell County Fence Co. installed woven wire fencing around part of our property, along with a large equipment gate. They explained the different post options, gave us a clear estimate, and helped us choose something that fit our budget. The fence looks strong and everything was completed professionally.”
“We had a chain-link fence installed for our backyard and dogs. Communication was easy, the pricing was reasonable, and the finished fence looks great. They also made sure the gates opened smoothly and were placed exactly where we needed them.”
Cedar & Treated Wood Decks in Washington — questions we get
- How much does a wood deck cost in Washington, IL?
- In Washington, pressure-treated decks generally run $24–$34 per square foot installed and cedar runs $32–$44. Height, stairs, and railing style move that more than the decking itself does — a ground-level deck with no rail is dramatically cheaper per foot than a walkout deck ten feet in the air.
- Treated pine or cedar — which is better here?
- Treated pine wins on price and structural strength; cedar wins on comfort, stability, and looks. Around Washington we frame everything in treated regardless, then let you choose the surface. If you plan to stain every couple of years either works. If you'd rather ignore it, cedar silvers gracefully where treated pine tends to check.
- When can I stain a new treated deck?
- Give it a season. New treated lumber holds mill moisture, and stain applied too early sits on the surface and peels. We usually tell Washington customers to wait until water soaks in rather than beads — often three to six months — then clean and seal.
- Do I need a permit in Washington?
- Washington requires a building permit and a site plan for decks; post-2013 rebuild areas are held to current wind and attachment detailing.